Processor, Memory, and Operating System |
Microprocessor | 800 MHz ARM Cortex A8 / NXP |
Memory Internal Flash | 2 GB NAND and 32 GB extended flash |
Operating System | Windows Embedded Compact 2013 |
RAM | 512 MB DDR3 SDRAM |
Physical |
Weight | Approximately 2.9 lbs (1330 grams) |
Display | 5.7 inch (14.5 cm) color VGA resistive touchscreen |
640 x 480 pixel |
Keypad | X button – similar to a Back key |
4 arrow buttons to navigate menus |
Checkmark- similar to an Enter key |
AC Adapter |
Battery | Rechargeable Lithium- Ion Power Module |
Operating Time | 8+ hours of typical use |
Charge Time | 3 to 4 hours |
LEDs | 6 LEDs. Five LEDs for indicating the progress of charging. One LED to indicate the AC adapter is charging the power module |
Battery Charger Options | Input voltage 90-264 VAC, 47-63 Hz |
Cables included with US, EU, UK, and AU plugs |
Connections |
USB | Micro USB Connector. USB 2.0 Remove the USB cable from the Trex unit before connecting to a device. |
Battery Charger | Barrel Round Plug Tip |
Wireless |
Wireless Approvals | FCC, CE, RED and IC Approvals |
Certified for use in over 100 countries |
Bluetooth | 2.1 |
Range up to 10 m |
Wi-Fi | 802.11 b/g/n |
Range up to 33 m |
NFC | Active NFC |
Range up to 20 mm |
Communication Modules |
Device Communicator Communication Module |
HART terminal | Enables HART device communication |
Connectors: Two Banana Jack Plugs |
Optional Internal Resistor: 250 or 500 Ohm |
Fieldbus (FF) terminal | Enables Foundation Fieldbus device communication |
Connectors: Two Banana Jack Plugs |
Device Communicator Plus Communication Module |
HART terminal | Enables HART device communication |
Connectors: Two Banana Jack Plugs |
Optional Internal Resistor: 250 or 500 Ohm |
HART + pwr terminal | Enables HART communication with the Trex unit, and provides power to one HART device in a bench setup |
Connectors: Two Banana Jack Plugs |
Includes HART power supply, resistors (167 Ohm), current control, and ammeter |
Current Range: 3 -22.5 mA |
mA terminal (external ammeter) | mA terminal (external ammeter) |
Connectors: Two Banana Jack Plugs |
Current Range: Up to 22.5 mA |
Resolution: 0.1 mA |
Fieldbus (FF) terminal | Enables Foundation Fieldbus device communication |
Connectors: Two Banana Jack Plugs |
FF + FF pwr terminal | Provides power to one Foundation Fieldbus device in a bench setup |
Connector: One Banana Jack Plug ( Power conditioner included) |
Current Range: 0- 38 mA |
Environmental |
Usage | -20°C to +55°C (-4°F to 131°F) |
For IS approval: -20°C to +50°C (-4°F to 122°F) |
Charge | +10°C to +45°C (50°F to 113°F) |
Storage with power module | -20°C to +50°C (-4°F to 122°F) (less than 1 month) |
Storage without power module | -20°C to +60°C (-4 °F to 140°F) |
Enclosure Rating | IP54 |
Shock | The unit shall survive a 1-meter, all sides and corners drop test onto concrete |
Upgrade Studio Requirements |
Installation | Windows 7 Professional Service Pack (SP1) 1 (32 and 64-bit) |
Windows 10 Professional |
512 MB of free disk space |
A Windows user account with Administrator privileges |