| General specifications |
|---|
| Signal type | Analog output |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 2 |
| Systematic capability (SC) | SC 3 |
| Supply |
| Connection | Power Rail or terminals 14+, 15- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | = 10 % |
| Rated current | = 45 mA at 24 V |
| Power dissipation | = 1 W at 20 mA and 500 O load |
| Power consumption | = 1 W |
| Input |
| Connection side | control side |
| Connection | terminals 7-, 8+, (9+); 10-, 11+, (12+) |
| Input signal | 4 ... 20 mA , limited to approx. 30 mA |
| Input voltage | open loop voltage of the control system = 30 V |
| Voltage drop | approx. 6 V at 20 mA |
| Input resistance | field wiring open circuit : > 100 kO
field wiring < 50 O : > 100 kO when using terminals 1, 2 and 4, 5 |
| Output |
| Connection side | field side |
| Connection | terminals 1+, 2-; 4+, 5-
terminals 3+, 2-; 6+, 5- (no short circuit detection) |
| Voltage | = 13 V at 20 mA |
| Current | 4 ... 20 mA |
| Load | 100 ... 650 O , for terminals 1, 2; 4, 5
0 ... 550 O , for Terminals 2, 3; 5, 6 |
| Ripple | 20 mV rms |
| Line fault detection | breakage, load > 100 kO, short-circuit, load < 50 O |
| Fault indication output |
| Output type | open collector transistor (internal fault bus) |
| Transfer characteristics |
| Deviation | at 20 °C (68 °F), 4 ... 20 mA
< 0.1 % of full scale, incl. non-linearity and hysteresis |
| Influence of ambient temperature | < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) |
| Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) |
| Rise time | 10 to 90 % = 10 ms |
| Galvanic isolation |
| Input/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/input | functional insulation, rated insulation voltage 50 V AC |
| Indicators/settings |
| Display elements | LEDs |
| Labeling | space for adhesive label at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Electromagnetic compatibility | NE 21:2017
EN 61326-3-2:2018 |
| Degree of protection | IEC 60529 |
| Protection against electrical shock | UL 61010-1:2012 |
| Ambient conditions |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 135 g |
| Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
| EU-type examination certificate | BAS 00 ATEX 7240 X |
| Marking |  II (1)G [Ex ia Ga] IIC
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I |
| Output | Ex ia, Ex iaD |
| Voltage | 25.2 V |
| Current | 93 mA |
| Power | 585.3 mW |
| Internal capacitance | 1.05 nF |
| Internal inductance | 0 |
| Supply | |
| Maximum safe voltage | 250 V rms (Attention! The rated voltage can be lower.) |
| Input | |
| Maximum safe voltage | 250 V rms (Attention! The rated voltage can be lower.) |
| Certificate | TÜV 99 ATEX 1499 X |
| Marking | II 3G Ex nA II T4 |
| Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Output/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-11:2012 , EN 60079-15:2005 |
USD
